DIY
Gate Kits Include :
2 x 12 DC motors, arms and pillar brackets.
2x safety photocells.
Integral control board & receiver (with antenna).
1 x radio transmitter (50m range)
|
DIY
Gate Kit £299.00 inc vat |
|
|
Stainless
steel security keypad £109.00 inc VAT |
|
|
Wireless
Keypad
£39.50 inc VAT |
|
 |
Induction
loop detector, includes 3 x 2 meter wire coil £99.50 inc
VAT |
|
|
Additional radio transmitters £25.00
inc VAT |
|
|
Delivery
Free of charge
money back guarantee
12 months warranty |
DIY (electric) Gate Automation Kits:
Installation of automatic gates is not straightforward. Good installers
have many years of experience and training. However, we do offer
a swing gate automation kit which has been developed as a ‘one
size fits
all’ system for the DIY installer.
The 12VDC low voltage XNODO is suitable for residential swing gates
up
to
2.5m (400KG) each leaf, across up to a 5m entrance, with the
following unique features:
1. Each motor is quickly fitted to the gate post of pillar with
a two piece arm to bolt or weld to the gate, and a manual release
on board each motor is provided (incase of power failure).
2. Each motor has internal limit switches which are adjustable.
This is very useful if no ground stops can be fitted in the closing
and/or opening position as limit switches can be set to accurately
stop the motor at a preferred position (great for sloping drives)
.
3. Uniquely, the control board is not housed separately, but inside
one of the motors. It is already connected to motor 1 and is connected
by 2 wires across the driveway motor 2.
4. All settings are configured automatically using the ‘self
learn’ button. Soft start, slowdown, open and close times,
auto-close and leaf delay
(to avoid collision on closing) are all pre-set in the memory.
Of course our technical team are on hand if you need any assistance”
|